Setting up a Apache 2 Webserver

From rbachwiki
Revision as of 14:43, 17 August 2016 by Bacchas (talk | contribs) (Created page with "== Setting up a Apache 2 Webserver on Ubuntu == === Installation === The Apache2 web server is available in Ubuntu Linux. To install Apache2: At a terminal prompt enter t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Setting up a Apache 2 Webserver on Ubuntu

Installation

The Apache2 web server is available in Ubuntu Linux. To install Apache2:

At a terminal prompt enter the following command:

sudo apt-get install apache2

Configuration

Apache2 is configured by placing directives in plain text configuration files. The configuration files are separated between the following files and directories:

apache2.conf: the main Apache2 configuration file. Contains settings that are global to Apache2.

conf.d: contains configuration files which apply globally to Apache. Other packages that use Apache2 to serve content may add files, or symlinks, to this directory.

envvars: file where Apache2 environment variables are set.

httpd.conf: historically the main Apache2 configuration file, named after the httpd daemon. The file can be used foruser specific configuration options that globally effect Apache2.

mods-available: this directory contains configuration files to both load modules and configure them. Not all modules will have specific configuration files, however.

mods-enabled: holds symlinks to the files in /etc/apache2/mods-available. When a module configuration file is symlinked it will be enabled the next time apache2 is restarted.

ports.conf: houses the directives that determine which TCP ports Apache2 is listening on.

sites-available: this directory has configuration files for Apache Virtual Hosts. Virtual Hosts allow Apache2 to be configured for multiple sites that have separate configurations.

sites-enabled: like mods-enabled, sites-enabled contains symlinks to the /etc/apache2/sites-available directory. Similarly when a configuration file in sites-available is symlinked it will be active once Apache is restarted.

In addition, other configuration files may be added using the Include directive, and wildcards can be used to include many configuration files. Any directive may be placed in any of these configuration files. Changes to the main configuration files are only recognized by Apache2 when it is started or restarted.

The server also reads a file containing mime document types; the filename is set by the TypesConfig directive, and is/etc/mime.types by default.

Basic Settings

This section explains Apache2 server essential configuration parameters. Refer to the Apache2 Documentation for more details.

Apache2 ships with a virtual-host-friendly default configuration. That is, it is configured with a single default virtual host (using the VirtualHost directive) which can modified or used as-is if you have a single site, or used as a template for additional virtual hosts if you have multiple sites. If left alone, the default virtual host will serve as your default site, or the site users will see if the URL they enter does not match the ServerName directive of any of your custom sites. To modify the default virtual host, edit the file /etc/apache2/sites-available/default.


[Note] The directives set for a virtual host only apply to that particular virtual host. If a directive is set server-wide and not defined within the virtual host settings, the default setting is used. For example, you can define a Webmaster email address and not define individual email addresses for each virtual host.


If you wish to configure a new virtual host or site, copy that file into the same directory with a name you choose. For example:

sudo cp /etc/apache2/sites-available/default /etc/apache2/sites-available/mynewsite Edit the new file to configure the new site using some of the directives described below.

The ServerAdmin directive specifies the email address to be advertised for the server's administrator. The default value is webmaster@localhost. This should be changed to an email address that is delivered to you (if you are the server's administrator). If your website has a problem, Apache2 will display an error message containing this email address to report the problem to. Find this directive in your site's configuration file in /etc/apache2/sites-available.

The Listen directive specifies the port, and optionally the IP address, Apache2 should listen on. If the IP address is not specified, Apache2 will listen on all IP addresses assigned to the machine it runs on. The default value for the Listen directive is 80. Change this to 127.0.0.1:80 to cause Apache2 to listen only on your loopback interface so that it will not be available to the Internet, to (for example) 81 to change the port that it listens on, or leave it as is for normal operation. This directive can be found and changed in its own file, /etc/apache2/ports.conf

The ServerName directive is optional and specifies what FQDN your site should answer to. The default virtual host has no ServerName directive specified, so it will respond to all requests that do not match a ServerName directive in another virtual host. If you have just acquired the domain name ubunturocks.com and wish to host it on your Ubuntu server, the value of the ServerName directive in your virtual host configuration file should be ubunturocks.com. Add this directive to the new virtual host file you created earlier (/etc/apache2/sites-available/mynewsite).

You may also want your site to respond to www.ubunturocks.com, since many users will assume the www prefix is appropriate. Use the ServerAlias directive for this. You may also use wildcards in the ServerAlias directive.

For example, the following configuration will cause your site to respond to any domain request ending in.ubunturocks.com.

ServerAlias *.ubunturocks.com The DocumentRoot directive specifies where Apache should look for the files that make up the site. The default value is /var/www. No site is configured there, but if you uncomment the RedirectMatch directive in/etc/apache2/apache2.conf requests will be redirected to /var/www/apache2-default where the default Apache2 site awaits. Change this value in your site's virtual host file, and remember to create that directory if necessary!

The /etc/apache2/sites-available directory is not parsed by Apache2. Symbolic links in /etc/apache2/sites-enabled point to "available" sites.

Enable the new VirtualHost using the a2ensite utility and restart Apache:

sudo a2ensite mynewsitesudo /etc/init.d/apache2 restart


[Note] Be sure to replace mynewsite with a more descriptive name for the VirtualHost. One method is to name the file after the ServerName directive of the VirtualHost.


Similarly, use the a2dissite utility to disable sites. This is can be useful when troubleshooting configuration problems with multiple VirtualHosts:

sudo a2dissite mynewsitesudo /etc/init.d/apache2 restart Default Settings This section explains configuration of the Apache2 server default settings. For example, if you add a virtual host, the settings you configure for the virtual host take precedence for that virtual host. For a directive not defined within the virtual host settings, the default value is used.

The DirectoryIndex is the default page served by the server when a user requests an index of a directory by specifying a forward slash (/) at the end of the directory name.

For example, when a user requests the page http://www.example.com/this_directory/, he or she will get either the DirectoryIndex page if it exists, a server-generated directory list if it does not and the Indexes option is specified, or a Permission Denied page if neither is true. The server will try to find one of the files listed in the DirectoryIndex directive and will return the first one it finds. If it does not find any of these files and if Options Indexes is set for that directory, the server will generate and return a list, in HTML format, of the subdirectories and files in the directory. The default value, found in /etc/apache2/apache2.conf is " index.html index.cgi index.pl index.php index.xhtml". Thus, if Apache2 finds a file in a requested directory matching any of these names, the first will be displayed.

The ErrorDocument directive allows you to specify a file for Apache to use for specific error events. For example, if a user requests a resource that does not exist, a 404 error will occur, and per Apache2's default configuration, the file/usr/share/apache2/error/HTTP_NOT_FOUND.html.var will be displayed. That file is not in the server's DocumentRoot, but there is an Alias directive in /etc/apache2/apache2.conf that redirects requests to the /error directory to/usr/share/apache2/error/.

To see a list of the default ErrorDocument directives, use this command:

grep ErrorDocument /etc/apache2/apache2.conf By default, the server writes the transfer log to the file /var/log/apache2/access.log. You can change this on a per-site basis in your virtual host configuration files with the CustomLog directive, or omit it to accept the default, specified in/etc/apache2/apache2.conf. You may also specify the file to which errors are logged, via the ErrorLog directive, whose default is /var/log/apache2/error.log. These are kept separate from the transfer logs to aid in troubleshooting problems with your Apache2 server. You may also specify the LogLevel (the default value is "warn") and theLogFormat (see /etc/apache2/apache2.conf for the default value).

Some options are specified on a per-directory basis rather than per-server. Options is one of these directives. A Directory stanza is enclosed in XML-like tags, like so:

... 

The Options directive within a Directory stanza accepts one or more of the following values (among others), separated by spaces:

ExecCGI - Allow execution of CGI scripts. CGI scripts are not executed if this option is not chosen.


[Tip] Most files should not be executed as CGI scripts. This would be very dangerous. CGI scripts should kept in a directory separate from and outside your DocumentRoot, and only this directory should have the ExecCGI option set. This is the default, and the default location for CGI scripts is /usr/lib/cgi-bin.


Includes - Allow server-side includes. Server-side includes allow an HTML file to include other files. This is not a common option. See the Apache2 SSI HOWTO for more information.

IncludesNOEXEC - Allow server-side includes, but disable the #exec and #include commands in CGI scripts.

Indexes - Display a formatted list of the directory's contents, if no DirectoryIndex (such as index.html) exists in the requested directory.


[Caution] For security reasons, this should usually not be set, and certainly should not be set on your DocumentRoot directory. Enable this option carefully on a per-directory basis only if you are certain you want users to see the entire contents of the directory.


Multiview - Support content-negotiated multiviews; this option is disabled by default for security reasons. See the Apache2 documentation on this option.

SymLinksIfOwnerMatch - Only follow symbolic links if the target file or directory has the same owner as the link.

httpd Settings

This section explains some basic httpd daemon configuration settings.

LockFile - The LockFile directive sets the path to the lockfile used when the server is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or USE_FLOCK_SERIALIZED_ACCEPT. It must be stored on the local disk. It should be left to the default value unless the logs directory is located on an NFS share. If this is the case, the default value should be changed to a location on the local disk and to a directory that is readable only by root.

PidFile - The PidFile directive sets the file in which the server records its process ID (pid). This file should only be readable by root. In most cases, it should be left to the default value.

User - The User directive sets the userid used by the server to answer requests. This setting determines the server's access. Any files inaccessible to this user will also be inaccessible to your website's visitors. The default value for User is www-data.


[Warning] Unless you know exactly what you are doing, do not set the User directive to root. Using root as the User will create large security holes for your Web server.


The Group directive is similar to the User directive. Group sets the group under which the server will answer requests. The default group is also www-data.

Apache Modules Apache is a modular server. This implies that only the most basic functionality is included in the core server. Extended features are available through modules which can be loaded into Apache. By default, a base set of modules is included in the server at compile-time. If the server is compiled to use dynamically loaded modules, then modules can be compiled separately, and added at any time using the LoadModule directive. Otherwise, Apache must be recompiled to add or remove modules.

Ubuntu compiles Apache2 to allow the dynamic loading of modules. Configuration directives may be conditionally included on the presence of a particular module by enclosing them in an block.

You can install additional Apache2 modules and use them with your Web server. For example, run the following command from a terminal prompt to install the MySQL Authentication module:

sudo apt-get install libapache2-mod-auth-mysql See the /etc/apache2/mods-available directory, for additional modules.

Use the a2enmod utility to enable a module:

sudo a2enmod auth_mysqlsudo /etc/init.d/apache2 restart Similarly, a2dismod will disable a module:

sudo a2dismod auth_mysqlsudo /etc/init.d/apache2 restart HTTPS Configuration The mod_ssl module adds an important feature to the Apache2 server - the ability to encrypt communications. Thus, when your browser is communicating using SSL, the https:// prefix is used at the beginning of the Uniform Resource Locator (URL) in the browser navigation bar.

The mod_ssl module is available in apache2-common package. Execute the following command from a terminal prompt to enable the mod_ssl module:

sudo a2enmod ssl There is a default HTTPS configuration file in /etc/apache2/sites-available/default-ssl. In order for Apache to provide HTTPS, a certificate and key file are also needed. The default HTTPS configuration will use a certificate and key generated by the ssl-cert package. They are good for testing, but the auto-generated certificate and key should be replaced by a certificate specific to the site or server. For information on generating a key and obtaining a certificate see the section called “Certificates”

To configure Apache for HTTPS, enter the following:

sudo a2ensite default-ssl


[Note] The directories /etc/ssl/certs and /etc/ssl/private are the default locations. If you install the certificate and key in another directory make sure to change SSLCertificateFile andSSLCertificateKeyFile appropriately.


With Apache now configured for HTTPS, restart the service to enable the new settings:

sudo /etc/init.d/apache2 restart


[Note] Depending on how you obtained your certificate you may need to enter a passphrase when Apachestarts.


You can access the secure server pages by typing https://your_hostname/url/ in your browser address bar


Back To Top- Home - Category