Difference between revisions of "Recover Broken Drives"

From rbachwiki
Jump to navigation Jump to search
 
Line 28: Line 28:


*Run exit to quit diskpart.
*Run exit to quit diskpart.
==[[Windows| Windows Category]]==

Latest revision as of 14:56, 26 April 2023

Sometimes, things might go wrong, and you end up with a half-flashed drive that is unusable by your operating systems, and common graphical tools might even refuse to get it back to a normal state. To solve these kinds of problems, we've collected a list of fail-proof methods to completely erase your drive in major operating systems.

Windows

In Windows, we'll use diskpart, a command line utility tool that comes pre-installed in all modern Windows versions.

  • Open cmd.exe from either the list of all installed applications, or from the "Run..." dialog usually accessible by pressing Ctrl+X.
  • Type diskpart.exe and press "Enter". You'll be asked to provide administrator permissions, and a new prompt window will appear. The following commands should be run in the new window.
  • Run list disk to list the available drives. Take note of the number id that identifies the drive you want to clean.
  • Run select disk N, where N corresponds to the id from the previous step.
  • Run clean. This command will completely clean your drive by erasing any existent filesystem.
  • Run create partition primary. This command will create a new partition.
  • Run active. This command will active the partition.
  • Run list partition. This command will show available partition.
  • Run select partition N, where N corresponds to the id of the newly available partition.
  • Run format override quick. This command will format the partition. You can choose a specific formatting by adding FS=xx where xx could be NTFS or FAT or FAT32 after format. Example : format FS=NTFS override quick
  • Run exit to quit diskpart.

Windows Category