Permissions on Linux

From rbachwiki
Revision as of 14:13, 17 August 2016 by Bacchas (talk | contribs)
Jump to navigation Jump to search

Permissions on Linux

File permission symbols
 
If you run the command
ls -l
in your home directory, you will get a list of files that may include something like this
 
-rw-r--r--   1  bob  users   1892   Jul 10  18:30 linux_course_notes.txt
 
This basically says, interpreting this from RIGHT to LEFT that the file, linux_course_notes.txt was created at 6:30 PM on July 10 and is 1892 bytes large. It belongs to the group users (i.e, the people who use this computer). It belongs to bob in particular and it is one (1) file. Then come the file permission symbols.
 
Let's look at what these symbols mean:
 
 
The dashes - separate the permissions into three types
 
 
The first part refers to the owner's (bob's) permissions.
 
 
The dash - before the rw means that this is a normal file that contains any type of data. A directory, for example, would have a d instead of a dash.
 
 
The rw that follows means that bob can read and write to (modify) his own file. That's pretty logical. If you own it, you can do what you want with it.
 
 
The second part of the these symbols after the second dash, are the permissions for the group. Linux can establish different types of groups for file access. In a one home computer environment anyone who uses the computer can read this file but cannot write to (modify) it. This is a completely normal situation. You, as a user, may want to take away the rights of others to read your file. We'll cover how to do that later.
 
 
After the two dashes (two here because there is no write permissions for the group) come the overall user permissions. Anyone who might have access to the computer from inside or outside (in the case of a network) can read this file. Once again, we can take away the possibility of people reading this file if we so choose.
 
Let's take a look at some other examples. An interesting place to look at different kinds of file permissions is the /bin directory. Here we have the commands that anybody can use on the Linux system. Let's look at the command for gzip, a file compression utility for Linux.
 
 
-rwxr-xr-x   1 root     root        53468 May  1  1999 gzip
 
As we see here, there are some differences.
 
 
The program name, date, bytes are all standard. Even though this is obviously different information, the idea is the same as before.
 
The changes are in the owner and group. Root owns the file and it is in the group "root". Root is actually the only member of that group.
 
The file is an executable (program) so that's why the letter x is among the symbols.
 
 
This file can be executed by everybody: the owner (root), the group (root) and all others that have access to the computer
 
As we mentioned, the file is a program, so there is no need for anybody other than root to "write" to the file, so there is no w permissions for it for anybody but root.
 
If we look at a file in /sbin which are files that only root can use or execute, the permissions would look like this:
 
 
-rwxr--r--   1 root     root         1065 Jan 14  1999 cron
 
'cron' is a program on Linux systems that allows programs to be run automatically at certain times and under certain conditions. As we can see here, only root, the owner of the file, is allowed to use this program. There are no xpermissions for the rest of the users.
 
 
We hope you enjoyed this little walk-through of file permissions in Linux. Now that we know what we're looking for, we can talk about changing certain permissions.
 
 
 
chmod
 
chmod is a Linux command that will let you "set permissions" (aka, assign who can read/write/execute) on a file.
 
 
chmod permissions file
 
chmod permission1_permission2_permission3 file
 
When using chmod, you need to be aware that there are three types of Linux users that you are setting permissions for. Therefore, when setting permissions, you are assigning them for "yourself", "your group" and "everyone else" in the world. These users are technically know as:
 
Owner
Group
World
Therefore, when setting permissions on a file, you will want to assign all three levels of permissions, and not just one user.
 
 
Think of the chmod command actually having the following syntax...
 
 
chmod owner group world FileName
 
Now that you understand that you are setting permissions for THREE user levels, you just have to wrap your head around what permissions you are able to set!
 
 
There are three types of permissions that Linux allows for each file.
 
#read
#write
#execute
Putting it all together:
 
So, in laymen terms, if you wanted a file to be readable by everyone, and writable by only you, you would write the chmod command with the following structure.
 
 
COMMAND : OWNER : GROUP : WORLD : PATH
 
chmod read & write read read FileName
chmod 6 4 4 myDoc.txt
 
Wait! What are those numbers?!?
 
Computers like numbers, not words. Sorry. You will have to deal with it. Take a look at the following output of `ls -l`
 
-rw-r--r-- 1 gcawood iqnection 382 Dec 19 6:49 myDoc.txt
 
You will need to convert the word read or write or execute into the numeric equivalent (octal) based on the table below.
 
4 – read (r)
2 – write (w)
1 – execute (x)
Practical Examples
 
 
chmod 400 mydoc.txt – read by owner
 
chmod 040 mydoc.txt – read by group
 
chmod 004 mydoc.txt – read by anybody (other)
 
chmod 200 mydoc.txt – write by owner
 
chmod 020 mydoc.txt – write by group
 
chmod 002 mydoc.txt – write by anybody
 
chmod 100 mydoc.txt – execute by owner
 
chmod 010 mydoc.txt – execute by group
 
chmod 001 mydoc.txt – execute by anybody
 
 
Wait! I don't get it... there aren't enough permissions to do what I want!
 
Good call. You need to add up the numbers to get other types of permissions...
 
 
So, try wrapping your head around this!!
 
7 = 4+2+1 (read/write/execute)
 
6 = 4+2 (read/write)
 
5 = 4+1 (read/execute)
 
4 = 4 (read)
 
3 = 2+1 (write/execute)
 
2 = 2 (write)
 
1 = 1 (execute)
 
 
chmod 666 mydoc.txt – read/write by anybody! (the devil loves this one!)
 
chmod 755 mydoc.txt – rwx for owner, rx for group and rx for the world
 
chmod 777 mydoc.txt – read, write, execute for all! (may not be the best plan in the world...)

File Permissions on Unix

Understanding file permissions on Unix: a brief tutorial

(For files on AFS fileservers, see below)

Every user on a Unix system has a unique username, and is a member of at least one group (the primary group for that user). This group information is held in the password file (/etc/passwd). A user can also be a member of one or more other groups. The auxiliary group information is held in the file /etc/group. Only the administrator can create new groups or add/delete group members (one of the shortcomings of the system).

Every directory and file on the system has an owner, and also an associated group. It also has a set of permission flags which specify separate read, write and execute permissions for the 'user' (owner), 'group', and 'other' (everyone else with an account on the computer) The 'ls' command shows the permissions and group associated with files when used with the -l option. On some systems (e.g. Coos), the '-g' option is also needed to see the group information.

An example of the output produced by 'ls -l' is shown below.

drwx------ 2 richard staff  2048 Jan  2 1997  private
drwxrws--- 2 richard staff  2048 Jan  2 1997  admin
-rw-rw---- 2 richard staff 12040 Aug 20 1996  admin/userinfo
drwxr-xr-x 3 richard user   2048 May 13 09:27 public
Understanding how to read this output is useful to all unix users, but especially people using group access permissions.

Field 1:   a set of ten permission flags. 
Field 2:   link count (don't worry about this)
Field 3:   owner of the file
Field 4:   associated group for the file
Field 5:   size in bytes
Field 6-8: date of last modification (format varies, but always 3 fields)
Field 9:   name of file (possibly with path, depending on how ls was called)

The permission flags are read as follows (left to right)

position	Meaning
1	directory flag, 'd' if a directory, '-' if a normal file, something else occasionally may appear here for special devices.
2,3,4	read, write, execute permission for User (Owner) of file
5,6,7	read, write, execute permission for Group
8,9,10	read, write, execute permission for Other
value	Meaning
-	in any position means that flag is not set
r	file is readable by owner, group or other
w	file is writeable. On a directory, write access means you can add or delete files
x	file is executable (only for programs and shell scripts - not useful for data files). Execute permission on a directory means you can list the files in that directory
s	in the place where 'x' would normally go is called the set-UID or set-groupID flag.
On an executable program with set-UID or set-groupID, that program runs with the effective permissions of its owner or group.

 

For a directory, the set-groupID flag means that all files created inside that directory will inherit the group of the directory. Without this flag, a file takes on the primary group of the user creating the file. This property is important to people trying to maintain a directory as group accessible. The subdirectories also inherit the set-groupID property.
The default file permissions (umask):

Each user has a default set of permissions which apply to all files created by that user, unless the software explicitly sets something else. This is often called the 'umask', after the command used to change it. It is either inherited from the login process, or set in the .cshrc or .login file which configures an individual account, or it can be run manually.

Typically the default configuration is equivalent to typing 'umask 22' which produces permissions of:

-rw-r--r-- for regular files, or
drwxr-xr-x for directories.
In other words, user has full access, everyone else (group and other) has read access to files, lookup access to directories.

When working with group-access files and directories, it is common to use 'umask 2' which produces permissions of:

-rw-rw-r-- for regular files, or
drwxrwxr-x for directories.
For private work, use 'umask 77' which produces permissions:

-rw------- for regular files, or
drwx------ for directories.
The logic behind the number given to umask is not intuitive.

The command to change the permission flags is "chmod". Only the owner of a file can change its permissions.

The command to change the group of a file is "chgrp". Only the owner of a file can change its group, and can only change it to a group of which he is a member.

See the online manual pages for details of these commands on any particular system (e.g. "man chmod").

Examples of typical useage are given below:

chmod g+w myfile
give group write permission to "myfile", leaving all other permission flags alone 
chmod g-rw myfile
remove read and write access to "myfile", leaving all other permission flags alone 
chmod g+rwxs mydir
give full group read/write access to directory "mydir", also setting the set-groupID flag so that directories created inside it inherit the group 
chmod u=rw,go= privatefile
explicitly give user read/write access, and revoke all group and other access, to file 'privatefile' 
chmod -R g+rw .
give group read write access to this directory, and everything inside of it (-R = recursive) 
chgrp -R medi .
change the ownership of this directory to group 'medi' and everything inside of it (-R = recursive). The person issuing this command must own all the files or it will fail.
WARNINGS:

Putting 'umask 2' into a startup file (.login or .cshrc) will make these settings apply to everything you do unless manually changed. This can lead to giving group access to files such as saved email in your home directory, which is generally not desireable.

Making a file group read/write without checking what its group is can lead to accidentally giving access to almost everyone on the system. Normally all users are members of some default group such as "users", as well as being members of specific project-oriented groups. Don't give group access to "users" when you intended some other group.

Remember that to read a file, you need execute access to the directory it is in AND read access to the file itself. To write a file, your need execute access to the directory AND write access to the file. To create new files or delete files, you need write access to the directory. You also need execute access to all parent directories back to the root. Group access will break if a parent directory is made completely private.

AFS Access Control Lists (ACLs)

Files on the central AFS fileservers all have the traditional Unix permissions as explained above, but they are also controlled by Access Control Lists(ACL) which take precedence. They provide access levels more flexible than the user/group/other attribute bits, but they work on the level of complete directories, not files. The command to set and list ACLs is fs. 
"fs" is a big ugly command that does lots of things related to AFS filesystems depending on the arguments you call it with.

For details see the man pages for: fs_setacl, fs_listacl, fs_cleanacl, fs_copyacl

For brief help, do (e.g.) "fs help setacl"

The default is to give the same permissions to a new directory as are on the parent directory. In practice, this is usually to give complete rights to the owner of the directory, and lookup rights to any other user (equivalent to execute attribute on a directory).

To render a directory private, the simplest command is:

fs setacl -d DIRNAME -clear -a MYNAME all

- replace DIRNAME with the appropriate directory name (or "." for the current directory, and MYNAME with your login name.

Check it with:

fs listacl DIRNAME

It should reply with:

Access list for DIRNAME is
Normal rights:
  USERNAME rlidwka
(see man fs_setacl for a description of the meaning of the flags "rlidwka")

To explicitly give public read/lookup access, use:

fs setacl -d DIRNAME -a system:anyuser read

This can be abbreviated to

fs sa DIRNAME system:anyuser read

If "fs" is not found, or the man pages are not found, your paths are not set up correctly. I recommend you run /usr/local/bin/mknewdotfiles to correct that.

Set File And Directory Permissions using Find Command

This wll set all the directores to 755 and all the files to 644

find  -type d -print | xargs chmod 755

find  -type f -print | xargs chmod 644

Back To Top- Home - Category